|
|
Shop Auto Parts ::
Mastercool 52224B Dual Temp Infrared Thermometer
|
Our Price: $72.98
List Price: $99.95
Your Save: $ 26.97 ( 27% )
Sales Rank: #3410 (lower is better)
Availability: Usually ships in 24 hours
Manufacturer: Mastercool
Avg. Customer Rating: 
|
|
|
|
|
|
|
Brand: Mastercool
EAN: 0700376522242
Manufacturer: Mastercool
Model: 52224B
Dimensions (in): 3 x 5 x 7
|
|
|
Mastercool 52224B Dual Temp Infrared Thermometer Features
|
- Temperature range: -76 to 1200 degrees F
- Field of view: 15 to 1 distance to spot ratio
- Min / Max, low and high temp alarm
- Accuracy: +/-1 percent of reading
- Includes 2 AAA batteries and instruction manual packaged in blow molded case
|
|
|
Mastercool 52224B Dual Temp Infrared Thermometer Description
|
Features and Benefits Temperature range: -76 to 1200 degrees F Field of view: 15 to 1 distance to spot ratio Min / Max, low and high temp alarm Accuracy: +/-1% of reading Includes 2 AAA batteries and instruction manual packaged in blow molded caseThe MSC52224B Dual Temp Infrared Thermometer features both Infrared and contact thermometer technologies. The infrared function includes advanced 15 : 1 optics to measure small targets at longer distances, laser targeting, programmable HI/LO alarms, adjustable emissivity and Lock Mode to capture temperature readings. The contact function offers a built-in K type jack for optional contact functions. Backlit display, MIN. MAX. DIFF and AVG reading.
|
|
|
|
|
|
|
|
|
Mastercool 52224B Dual Temp Infrared Thermometer customer reviews:
|
Very nice IR thermometer
I shopped pretty hard for this item. It has a 1:15 spot size which is nice, and unlike other units it goes down to -76F. The plug-in on the side for a thermocouple probe (probe not included with this model) is a plus. It comes in a blow-molded plastic case. Buy the one Amazon sells directly and get free shipping!
Physically the unit is designed well. The battery compartment door is a bit stiff, and the trigger spring is rather hard, but these are minor quibbles. The main large temperature display always shows the current IR measurement, and holds it when the trigger is released. The unit stays on for maybe a minute or so afterward, including the backlight (if enabled).
There are lots of display modes for the secondary smaller temperature display and they are easy to access via the rubber keys under the display. Min and max are recorded over the measurement period in which the trigger is held in. Average is a true running average, and not the simple average of min & max. Probe temp is shown when a probe is plugged in and prob temp is selected for the secondary display. Emissivity is adjustable from 0 to 100, so you can calibrate the IR reading with the probe reading if desired.
My unit came with the pointing laser and backlight off by default, not sure why, but they are easy to enable via the rubber buttons. There is also a "always on" mode that might not be obvious, as the laser does not come on, even if it is enabled. So if you find that your unit is not automatically turning off, perhaps you put it in this mode (there is an icon on the display too).
As a test I tried adjusting the emissivity to around 75 so that my body temperature would read correctly when scanning my forehead and reading the max over 5 seconds or so. This gave reliable readings one day, and unreliable the next, so you probably can't use it as a replacement for a fever thermometer. That was just an experiment, and I wasn't expecting it to work reliably in that fashion.
It's fun to check the temp of things on the stove & in the fridge & freezer, and it works well for finding cold air infiltrating our house. Great item, everyone should have one of these things in their science kit / tool box!
|
|
|
|
|
Thanks for shopping at Shop Auto Parts, please visit us again!
|
|
|
|
